Printer not working with Snapdragon Surface Pro: ARM checks

Documentation reviewed November 16, 2026. This guide uses Microsoft documentation; it does not claim hands-on testing of these fixes.

Applies to: ARM-based Surface Pro running Windows 11, including Snapdragon models. Confirm the processor; Intel Surface Pro models are a different branch.

Separate a printer that cannot be found from a manufacturer installer that will not run. An installer failure does not, by itself, prove that basic printing is impossible.

1. Confirm the computer and printer

Open Settings > System > About and inspect System type for an ARM-based processor. Record the printer’s full model number and whether it is connected by USB or network. Check the printer manufacturer’s guidance for that exact model and Windows on ARM.

Microsoft acknowledges that some manufacturer-provided printer installers fail on ARM PCs. Its ARM installation guidance recommends Windows’ built-in installation route unless the manufacturer provides different instructions.

2. Establish the connection

  • USB: power on the printer and connect it directly with a suitable cable while testing.
  • Network: confirm the printer and Surface are on the same network and that the printer reports a working connection.
  • Managed workplace printer: ask IT for its approved installation method and ARM support rather than changing network or security settings.

A second computer printing successfully is useful evidence that the printer can work, but it does not prove the same driver package will work on the Surface.

3. Add it through Windows

Open Settings > Bluetooth & devices > Printers & scanners. Check whether the printer is already listed. If not, choose Add device and allow discovery to complete. Select the intended printer, then check Windows Update for applicable drivers. Use the manual-add option if automatic discovery does not find it, following Microsoft’s printer installation instructions.

4. Test the functions you need

Print a simple document before testing scanning, finishing options or a vendor utility. Basic printing and the manufacturer’s complete software suite are separate requirements. A missing scanning feature is a more specific problem than a printer that cannot receive any job.

If Windows adds the printer but output fails, record the queue status and exact error. If the manufacturer does not support the necessary ARM function, repeated Windows resets will not supply that missing support. Ask the manufacturer about a supported connection method or alternative driver before purchasing replacement hardware.

What to send support

Provide the Surface processor and Windows version, printer model, connection type, the installation route tried and whether a simple test document prints. Include the exact error message, without publishing account details or private documents.

Sources

Kent Beck

Kent Beck is an American software engineer and the creator of extreme programming, a software development methodology that eschews rigid formal specifications for a collaborative and iterative design process. Wikipedia
Knowledge Panel 

Pin It on Pinterest

Share This